• Variety of Patriotic Themed Stencils
• 9" X 12" stencil sheet
• Ships unweeded with a separate sheet of transfer tape
• Fast and free shipping with a tracking number
• We include a cardboard insert for mailing protection
Please Note: This is an intricate stencil pattern and should only be purchased if you are comfortable with weeding complicated stencils.
Each design size is as follows:
• 1776 Stars: 2" X 2"
• 3% Bullets: 2" X 2"
• Eagle Flag: 2.125" X 1.75"
• Eagle Head: 2" X 1.75"
• 2nd Amendment: 4" X 1"
• Independence: 4" X 1"
• Gadsden: 2" X 2"
• Patriot: 3" X 1"
• Smaller 1776 Stars: 1.375" X 1.375"
• Liberator: 3.5" X 1"
• Freedom: 4" X 1"
• 2nd Amendment: 4" X 1"
• We the People: 4" X 1" (we highly recommend weeding this as a female stencil as shown in the picture)
The 411 On Our Stencils:
For those unfamiliar with high heat vinyl stencils, this stencil is cut out of Avery Dennison high heat paint mask stock. This is great vinyl material because it is:
• Flexible for applying to firearms and projects that are odd shaped and have details to work around
• Self-adhesive but does not leave a sticky residue
• Designed for high heat applications such as Cerakote or Duracoat
• Works well with air-dry applications such as Krylon
As factory trained and certified Cerakote applicators (https://www.cerakote.com/applicators/21880/branson-cerakote), we design and use these stencils in our shop when coating firearms, sunglasses, stainless steel tumblers, and more. We have had no issues with the vinyl tearing, failing to stick, or leaving a residue even when put through several heat cycles in our professional Cerakote oven at over 200+degrees (please note, the surface must cool prior to removing the stencil). We have also used this stencil material in our sandblast cabinet with no issues of the vinyl peeling up under pressure (we've used it up to 90 psi).
We began cutting our own stencils after buying several stencils that were not up to our standards (for example: not high heat material, poor design, or cuts that were not crisp). Even if we weren't cutting our own stencils, we would only recommend stencils cut with Avery Dennison stock.
• We recommend that these stencils are for a one-time use.
• These stencils will only work on a smooth surface in order for the stencil to adhere completely to the surface and avoid feathering under the stencil.
• Our stencils are intended for rifles, pistols, magazines, tumblers and sunglasses. However, we have many customers who use our stencils for multiple other purposes and surfaces.
• Unless otherwise noted, we ship our stencils unweeded.
• We have a YouTube Channel www.youtube.com/bransoncerakote that shows a wide variety of Cerakote projects, plus tips and tricks for using stencils.
• If you order this stencil and have any questions prior to use, please contact us.
• We appreciate customer input in order to ensure the utmost quality in our stencils.